Narrowboat 25ft Project
- Bateau REF# · 154332
- Longeur hors tout · 7.75m
- Année ·
- Construction · Acier
- Coque · A déplacement
- Moteur · 1 x gasoil 0cv, Unknown ()
- Visible à · Stroud
Ce bateau est vendu Voici d’autres bateaux à vendre
Détails supplémentaires
| Chantier | Unknown |
|---|---|
| Visible à | Stroud |
| Capacité carburant | 90.0 L (19.8 G) Total - 1 Cuve(s) |
| Capacité d'eau | 300.0 L (66.0 G) Total - 1 Cuve(s) |
Mécanique
| Moteur | 1 x gasoil 0cv |
|---|---|
| Marque et le modèle du moteur | Unknown () |
| Heures moteur | Inconnu |
| Refroidi par | Indirect |
| Barre | barre franche |
| Transmission | arbre d'hélice |
| Hélice(s) | 3 blade |
| Consommation carburant (approx) | Inconnu |
| Vitesse de croisière | 4 noeuds |
| Vitesse Max | 5 noeuds |
Dumper truck type tw cylinder diesel engine which runs well.
Engine control and electrical switchboard in place
Dimensions
| Longeur hors tout | 7.75m |
|---|---|
| Bau | 2.08m |
| Tirant d'eau Min | 0.50m |
| Deplacement | 4,988kg (10,998.5lbs) |
| Hauteur sous barrots | 1.85m |
| Stationnement | Au sec |
Construction
| Construction | Acier |
|---|---|
| Coque | A déplacement |
| Finition | Bitumen finition |
Hull has been blacked 2012
Topsides will be cleaned and primed prior to sale
Single glazed windows are included and ready to be installed
Aménagements
| Cabines | 2 |
|---|
Partially lined in ply with electrical and water system in place.
Partially built shower room with shower tray in place
Aménagements
| Système d'eau sous pression |
|---|
Partially lined in ply with electrical and water system in place.
Partially built shower room with shower tray in place
Accastillage de pont
| Amarres | |
|---|---|
| Parre battages |
1 ancre(s)
(Spade)
5.00m de chaîne
10.00m de bout
Equipement de Sécurité
1 pompes de cale (0 manuel / 1 électrique)
Commentaires du Broker
This is a stalled project as the owner is unable to complete for health reasons. She will make a nice little weekend style narrow boat and with the engine installed already represents a great opportunity.
The vessel can be completed in the covered workshop where she is if required at a cost of circa £50 per month and all parts needed to complete can be sourced via the vendor if desired.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.